Friday, January 17, 2014

Coverstar Automatic Cover System Types


Automatic pool covers have seen a number of innovations in recent years which give greater flexibility to the types of pools that can include an automatic cover.  Automatic pool covers travel through aluminum tracks that are installed on each side of the pool.  These tracks form a rectangle around the pool. 
Because automatic pool covers are rectangular in shape, they have traditionally been an easy addition to rectangular shaped pools.  However, through these new innovations, automatic pool covers can also be installed on freeform pools during the construction of the pool or even to existing pools. 

Automatic Covers systems come in three different types, Underguide, Recessed Topguide and Deckmount.  The system type that is used will depend on the shape of the pool and the location of the cover track.  Let's look at these three different options:

Underguide

An underguide cover system provides an attractive and effective solution for rectangular pools.  The entire motorized drive mechanism is mounted below the deck and sliders through aluminum tracks that are mounted along the side of the pool underneath the coping.  This conceals the track and allows it to be virtually unnoticed. 

For a more integrated look, encapsulation can be mounted directly to the pool wall during the construction of the pool.  The coping is then poured over the top of the encapsulation, locking it in place.  The encapsulation includes a channel where the cover track will be inserted during the installation of the cover system.  This method allows the cover track to be built back into the wall of the pool. 

The cover housing can be covered using lids that are aluminum, or in order to blend in with the surrounding pool area, they can be stone or concrete. 



Recessed Topguide
  
 
 
Recessed Topguide systems are used when covering a non rectangular shaped pool.  In this case, the drive mechanism is again mounted below grade in a cover housing.  The cover track is located outside the shape of the pool. 
 
There are different tracks that can be used.  Standard topguide track sits on top of the finished pool deck.  It is secured to deck using screws and anchors.  While the track does have a low profile similar to that of a door threshold, it is sitting above the deck. 
 
Recessed guides can also be used in this case as shown in the picture above.  During the construction of the pool, tracks are positioned along the sides of the pool and poured into the deck with the top of the track being flush with the finished pool deck. 
 
When using either of these track options, it is important to keep the tracks as close to the pool as possible to minimize the amount of pool deck the cover will be pulled across. 
 
Deck Mount
 
 
A Deck Mounted system can be installed on existing pools.  Both the drive mechanism and the cover track are mounted directly on top of the pool.  With the drive mechanism on top of the deck, benches can be built over them to provide a covering, as well as a perfect location to sit and visit. 
 
Regardless of the cover system type, all Coverstar automatic covers provide a number of benefits that the homeowner will gain by adding an automatic pool cover to their swimming pool.
 
The first is Safety.  Although an automatic cover doesn’t replace the need for adult supervision, it does give peace of mind knowing that there is another layer of protection between your loved ones and your swimming pool.
The second benefit is Savings.  Pool owners can see dramatic savings in these areas by using an automatic cover:
Pool Heating
Because an automatic safety cover is so easy to use, your pool can be covered when it’s not in use. Covering your pool will dramatically reduce water evaporation and heat loss by up to 70%.
Pool Chemicals
Your automatic cover helps keep your pool chemistry in balance.   Your pool looses chemicals through water evaporation.  An automatic cover seals the water in, reducing chemical loss by up to 70%.  Buying a swimming pool is an investment in family fun.  An automatic cover maximizes the value of your pool investment. 
Electricity
Your automatic cover reduces the amount of energy needed to clean your pool.  Electricity is required to run the equipment that cleans your pool.  An automatic cover keeps dirt and debris out of your pool, saving you up to 50% on electricity. 
Not only will the pool cover save you money, you will feel satisfied knowing that you are conserving precious resources.   
Water
An automatic cover reduces water evaporation by up to 90%.  Keeping your pool covered eliminates the need to constantly add water to your pool.  Imagine saving time, money and natural resources all at the same time.   
There is no better way to conserve important natural resources than an automatic pool cover. It’s like a roof for your pool that helps keep out the undesirable things like dirt, leaves and insects while keeping in the good things, like heat, pool chemicals and water. It’s the perfect solution because you care about the environment and want to save money.
The third benefit is convenience.  When closed, an automatic pool cover will keep the dirt, leaves, bugs etc out of the pool.  This will give pool owners more time to enjoy the pool and less time cleaning and maintaining it. 
Automatic pool covers are custom made for the specific pool it is installed on.  Whether you have a square or a freeform shaped pool, in most cases, your pool can have an automatic pool cover.    




4 comments:

  1. Auto Pool Reel
    Knowledge giving Article! I appreciate you. I completely agree with you. If we talk about current scenario then it is must be update. I enjoyed reading. I would like to visit more for more queries.

    ReplyDelete
  2. Knowledge giving Article! I appreciate you. I completely agree with you. If we talk about current scenario then it is must be update. I enjoyed reading.
    Covers in Play

    ReplyDelete
  3. It is really a very nice posting. I am greatly impressed after reading it. Thanks
    Automatic pools covers

    ReplyDelete